Vacuum packing machine is suitable for all kinds of plastic composite film bag or aluminum foil composite film bag vacuum packaging, can be used for all kinds of raw food, sauce, fruit, native products, herbal medicine, chemical products, precision instruments, clothing, hardware, electronic parts and other solid, powder, liquid vacuum packaging.
When using, what should be prepared and what should be paid attention to?
First, make good preparation before use:
1. The equipment is placed smoothly, check whether the cover is smooth, and whether it jumps automatically after release.
2. Equipped with power supply that meets the requirements of the model.
3. Check whether the oil level position of the vacuum pump is correct. If there is any error, adjust it in time (see the vacuum pump operation manual for details).
4. The machine is well grounded.
5. Turn on the power, turn on the power switch, close the cover, and check whether the vacuum pump is working normally.
Second, tuning before use：
1. Select the vacuum state: the suction time of the utility model is 0-30 seconds, the digital display, continuous adjustment, the suction time of the small vacuum packing machine is 0-30 seconds.
Adjust suction time to achieve desired vacuum.
2. Select the heating temperature: adjust the heating temperature knob to the appropriate position according to the heating temperature required by the material selection in the package.
3. Adjust the length of heating time: heating time, digital display, continuous adjustment, according to the packaging materials and heating temperature to adjust the heating time knob, choose the appropriate heating time.
4 According to the need to choose silica gel sealing with silica gel word, set the sealing date and other glyph.
Third. Matters needing attention in the process of use：
1. Turn on the power switch;
2. Open the laminating strip of the packing bag, put the packed packing bag into the working room, and put the sealing on the silicone rubber strip. Do not overlap the packing bag, but press the opening of the packing bag with the laminating strip.
(or press the edge of the upper cover) press down the toolbox, press the cover, the machine will automatically complete the vacuum packaging process according to the program, the cover will open automatically, and some equipment is equipped with an emergency stop switch.
4. Open the vacuum cover, take out the package, that is to complete a cycle work.
5. When stop working, turn off the power switch and unplug the plug.
