Food and chemical industry on the screw mixer requirements are very high, first of all must be stainless steel material, the internal smooth can not have screw accessories, etc., so as not to fall off into the material, followed by convenient discharge, food and chemical materials are more expensive, it is best not to waste phenomenon, there is a point is good sealing, mixing to be uniform.
The screw belt mixer of PUDA company has the advantages of uniform mixing, no dead Angle, fast discharge, no surplus, large capacity, stable operation, simple maintenance, etc. Internal all full welding polishing treatment, polishing master is more than five years of experience, powder materials using pneumatic big door structure, discharge clean residual; It is composed of a U-shaped cylinder, a spiral belt mixing blade and a transmission component. The spiral blade is generally made of double layers, the outer spiral belt will collect the material from both sides to the center when working, the inner spiral belt will transport the material from the center to both sides, forming a convective mixing. Mixing parts can also be made into paddle type or add a flying knife to adapt to different materials. The lid can be made into an arch or fully open type, and the arch can be pressurized. Its advantages are wide application range, high mixing uniformity, short mixing time and large loading coefficient.
