Are all unpacking machines suitable for unpacking and feeding?
The answer is no. There are many kinds of charter planes in the market, with varying quality. Blindly choosing charter planes may backfire.
1. Can the production capacity of unpacking and feeding be met?
At present, there are many equipment manufacturers in the market, due to the technical problems of equipment, equipment quality problems, unable to run continuously, resulting in the actual unpacking efficiency is low, unable to meet the production capacity needs of unpacking materials, has a greater impact on the normal production of enterprises.
To ensure the smooth output of unpacking and feeding capacity is the premise to ensure the return on investment of the unpacking machine, and is the primary purpose of choosing the unpacking machine. PUDA is 4-5 times more efficient than manual unpacking and feeding, and has an excellent return on investment.
2. Can you handle the dust of unpacking?
In view of the dust pollution in the production capacity during unpacking and feeding, Kele automatic unpacking machine can eliminate the dust problem in the process of unpacking and feeding, improve the production operating environment, and benefit the occupational health of employees.
Because the whole unpacking process is completed under closed and negative pressure, there is no dust leakage during the process, and the waste bags after unpacking enter the waste bag collector, which avoids dust pollution generated during the collection and handling of waste bags.
And the equipment of a lot of unpacking machine manufacturer, in the unpacking process equipment itself exists everywhere leakage ash situation, also talk about control dust.
3. Can you handle different bags?
Often in the same unpacking devices need to deal with different kinds of bags, with the kinds of woven bags, plastic bags, paper bags, etc., can handle different bag bag, there are a few points as the premise, the first is whether equipment in dealing with a different bag bag can run normally, 2 it is to guarantee the emptying rate, three is can guarantee the production capacity, therefore, when choosing destacker above points need to be clear.
4. Sensitivity to cross contamination
If using an automatic destacker unpacking feeding different raw material, there may be caused by different materials in the destacker residues of cross-contamination problems, lei for this situation, the development and design of the product can do destacker internal no residue, of cross contamination is not allowed, you can configure the internal brake injection device, to prevent cross-contamination problems of different materials.
5. Whether it has the ability to remove the broken silk of woven bags
For bale opener is by knife cutting bags, set in the process, will produce a certain number of bags woven silk and packaging debris, lei automatic destacker optimization of the design of the knife set, can reduce the production of knitting yarn and elastic, and can at discharging port configuration lei in the box, can remove most of the bags produced in the process of cutting and packing bag debris bags woven silk, ensure the quality of the material, also avoid woven bag broken wire into the next process after the, may be blowing machine, for example, after dragon runs the risk of damage.
