The micro nano powder packaging machine can adjust the time of each working link separately according to different packaging materials and volume, or use a single link separately. The machine is composed of oil and water removal air filtration system, molecular sieve air pressure swing adsorption separation nitrogen system, vacuum generator vacuum system, ultrafiltration gas storage and supply system, instantaneous heating and sealing system, DELTA PLC programming control system, free lifting studio and rack, stainless steel casing. This machine can be used with other equipment and production machine. Has the vitality of the fruits and vegetables, flowers, after the harvest will continue to its metabolism, processed foods to health and eat in standard cases, continue to absorb oxygen from the air during transportation storage, and with its own carbohydrate oxidation and release carbon dioxide, heat and water, in turn, fully mature (processed foods breeding breeding of various types of bacteria, mold and yeast). If it continues to live at this point, it will destroy its original chemical balance.
After the impeller is rapidly accelerating injection, first with the powder cone free fall impact crushing another part of the material, and then hit with eddy current eddy current on the lining cavity, be rebound to the top of the crushing cavity, deflecting downward movement, after impeller passage emitted material impact to form a continuous material curtain, and finally by the lower discharging mouth eduction. All the load bearing for machine, so good lubrication for the bearing life has a lot to do, it directly affects the service life of machine and availability, and requirements into lubricating oil must be clean and seal must be good, the machine's main oil (1) the rotation bearing (2) roll bearing (3) all the gear bearing, sliding plane (4) activities. The newly installed wheel is easy to loose and must be checked frequently. Pay attention to the normal operation of all parts of the machine. Pay attention to check the wear degree of easy to wear parts, pay attention to replace worn parts at any time. Put the chassis plane of the mobile device, should be out of the dust and other things to avoid the machine can not be broken when the material movable bearing can not move on the chassis, resulting in serious accidents. Bearing oil temperature rise, should immediately stop to check the cause to eliminate.
