1. Micro and nano powder packing machine double speed filling, accurate measurement, imported electronic weighing system, high packaging accuracy.
2. Stable performance, simple operation, easy maintenance, high cost performance. The performance is better than Italy and Taiwan similar equipment.
3. Double sealing, completely environmental protection, powder material does not leak, do not stick to the bag, bag surface clean after packaging.
4. Explosion-proof control system can be equipped to meet the packaging requirements of conductive materials.
Nano powder packing machine is suitable for automatic packing of small bags of powder materials which are not easy to flow (such as milk powder, bean milk powder, starch, medicine powder, pesticide powder, coffee powder, flavoring powder, etc.). The shape of the finished product after packaging is flat bag with three or four sides sealing, but the heat sealer is different for the packaging machine of powder (note: the shape of three sides sealing is conventional product, and the shape of four sides sealing needs to be specially customized heat sealer body). Bag-making system adopts step motor subdivision technology, Chinese characters display controller, four way to control the temperature, heat sealing device reliable photoelectric detection system, automatic printing batch number or production date, easy tear mouth on packaging products, metering screw driven by stepping motor can obtain high repeat precision, production all use stainless steel material, part contacting materials adopts 304 stainless steel, This packing machine fully conforms to the requirements of pharmaceutical GMP.
1, ton bag packaging machine regularly check parts, once a month, check whether the worm gear, worm, lubrication block bolts, bearings and other active parts are flexible rotation and wear, found defects should be repaired in time, not forced to use.
2, ton bag packaging machine should be placed in dry clean indoor use, not in the atmosphere containing acids and other corrosive gas circulation places.
3. When the machine is used or stopped, the rotating drum should be removed for cleaning and brushing the remaining powder in the bucket, and then packed properly to prepare for the next use.
4. When the drum moves back and forth during work, please adjust the M10 screw on the front bearing pawn to the appropriate position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, hand turn the pulley, appropriate tightness is appropriate, too tight or too loose can make the machine may damage.
5. If the ton bag packing machine is not used for a long time, the whole machine must be wiped clean, the smooth surface of the machine should be coated with anti-rust oil and covered with cloth.
