There are no hidden dangers for the safety of the packaging machine.
But if the operator to ignore the safety warning signs posted on the machine, knowing internal high temperature furnace danger, put his hand to force through the high temperature segregation drape, entered the high temperature furnace, if not touch to the isolation of the inside of the rail network infrared tube, packaging machine can also because the high temperature of hot air furnace wall or metal within different degree burns!
Visible this kind of accident, do not have to encounter the heating pipe installed in the inner wall of the furnace isolation iron net inside, any part within the scope of the furnace is likely to be hurt;
If the operator must touch the fast-rotating fan deep into the pit of the furnace at the risk of being hurt, it is no different from jumping onto the track knowing that the train is coming!
This situation is so extreme that it can't be avoided with any advanced equipment.
Inside the heating furnace (inner wall), the side wall of the infrared heating pipe is installed with iron mesh isolation (pull open the high-temperature curtain, and watch from the entrance or exit direction of the furnace, only see the protective net and can not see the heating pipe);
The fan blade is in the upper part of the furnace depth about 40cm from the exit and entrance, and the fan blade is installed in the upward concave (not protrusive on the surface of the furnace). The high-temperature resistant curtain is pulled open, and the fan blade can hardly be seen from the direction of the furnace entrance or exit.
When the machine is powered on, the heating pipe in the furnace starts to heat, which can be raised to 150℃ or even higher according to the use requirements. The fan of the packing machine also runs at the same time to play the role of uniform furnace temperature.
When the machine is shut down, the heating pipe will be cut off, and the fan will continue to operate and cool down before the machine is shut down.





