Particle packaging machine maintenance instructions
Check the machine parts regularly, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other moving parts are flexible and wear, find defects should be repaired in time, not forced to use.
The machine should be used in a dry and clean room, and should not be used in a place where the atmosphere contains acids and other corrosive gases to the body.
After the micro nano powder packaging machine is used or stopped, the rotating drum should be removed for cleaning and brushing the remaining powder in the bucket, and then installed to prepare for the next use.
Adjust the M10 screw on the front bearing shank to the proper position when the roller moves back and forth during operation. If the shaft moves, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the clearance so that the bearing does not make a noise, hand turn the pulley, the appropriate tightness is appropriate, too tight or too loose can make the machine may be damaged.
If the time is long, the whole body of the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and the cloth cover is good.
Powder packaging machine is also called powder packaging scale, which is developed for powder packaging in fertilizer, chemical, food, pharmaceutical and other industries, and can be fully applied to semi-automatic metering filling and packaging of 5-50Kg powder materials; Supporting screw elevator, belt conveyor, sealing device, manual bagging, automatic bag clamping, metering, filling, bag dropping, conveying, manual assisted sealing station, powder packaging machine
Heat seal the inner bag or sew the outer bag to complete the semi-automatic packaging process.
Powder packaging machine performance characteristics
Double screw fast, slow two-stage feeding, with two sets of electromagnetic clutch brake, to ensure accurate feeding. From raw material inlet to receiving port, fully closed design; There are multiple suction ports, including the feeding part, the discharging part, the receiving part, optional dust removal system, to ensure that the packaging environment dust is small. The sensor and its suspension device, the core control part adopts the most advanced electronic weighing technology, highly intelligent weighing controller, automatic drop correction, automatic zero tracking, overshoot detection and suppression functions; Automatic statistics of the number of packages and the amount of packages; The measurement speed is fast, the precision is high, the performance is long-term stable and reliable.
