Jan 31, 2024 Leave a message

Classification is one of the most important links to improve the efficiency of ultrafine grinding

In the production process, the selected crusher requires the production of product particle size distribution in a certain range, and in fact, the product particle size distribution of the output of the mill is more extensive than the required particle size range, and most of them are difficult to meet the requirements. Therefore, in the grinding process, classification is one of the most important links to improve the efficiency of ultrafine grinding and produce fine powder products that meet the requirements of fineness and grading.

The so-called classification is according to the requirements of the production process, the grinding product according to a certain particle size or different types of particles for sorting the operation process.

There are two ways of grading: sifting with a sieve and grading in a fluid. Screen screening represents the main products are linear screen, circular vibrating screen and other screening machines. Air screening represents products such as gravity classifier, coarse classifier, centrifugal classifier (also known as centrifugal classifier), cyclone classifier, O-sepa classifier, jet vortex classifier, forced vortex classifier.

The working principle of air classification:

The production line is mainly composed of air classifier, cyclone separator, pulse dust collector, high pressure induced draft fan, electric control cabinet and so on.

The main air classification machine is mainly composed of secondary air, tertiary air, impeller and transmission system. When the production line works, the material enters through the feed pipe of the classifier under the action of the gravitation of the induced draft fan. In the classifier, the air and the material are fully mixed, and the gas-solid two-phase flow is fully dispersed under the action of the lower cylinder of the classifier and the dispersion cone.

When the gas-solid two-phase flow rises to the classification zone, each individual particle is subjected to both the centrifugal force generated by the rotation of the classification wheel and the centripetal force generated by the gravitation of the induced draft fan. When the centrifugal force is greater than the centripetal force, the coarse particles above the grading diameter are thrown to the inner wall of the cylinder, and fall along the inner wall of the cylinder after stall to the secondary wind washing area. Under the action of the induced draft fan, the air enters the panning area through the secondary air intake uniformly distributed on the cone, and carries on the panning effect of the air sieve on the coarse and fine mixed powder. In this way, the fine particles mixed with or adhering to the coarse material are separated and returned to the classification area, and the coarse particles are discharged from the classifier by the discharge device. The fine particles that meet the particle size requirements enter the cyclone collector with the air flow, the pulse dust collector is collected, and the purified gas is discharged into the atmosphere through the exhaust outlet of the induced draft fan

Send Inquiry

whatsapp

Phone

E-mail

Inquiry