In addition to correct use of the machine but also correct maintenance, correct maintenance will make the machine in operation without failure, prolong the service life. Incorrect maintenance will not only make the service life of the machine longer, but also make the machine full of failures.
As the saying goes, sharpening the knife does not miss the wood worker, so it is very important to maintain on time! (1) Lubrication 1, each rolling bearing in principle can not be filled with oil 2, the stepless transmission (bag long transmission) initially run for one month, oil change once a month, after every six months, the oil brand is N320 industrial gear oil or lubricating oil in line with ISOVG320 standards. 3, differential box, the initial operation of once a month to change the oil, after every four months to change the oil, the oil brand is N320 mechanical oil. 4, each transmission chain after 1000 hours of work, with industrial butter lubrication. 5. The eccentric part of the transverse sealing shaft is lubricated with grease. 6, the upper clamping conveyor shaft and the connection of the universal joint shaft should be often lubricated. (2) Maintenance 1, the stepless transmission after three months of operation, usually need to adjust the tension of the chain in the stepless transmission box, please adjust the user according to the manual and the adjustment method on the transmission plate 2, the packaging machine transmission chain tension adjustment, the new machine after three months of operation, need to adjust the tightening sprocket of the transmission chain to eliminate the chain too slack . After the general adjustment every year of operation.
