The use of packaging machine is very extensive, but if the maintenance is not in place, there will be some minor failures, affecting the efficiency and process of packaging. So what are the common maintenance methods of the packaging machine?
1. Before starting the machine, check whether the parts of the automatic packaging machine are in good condition, and whether the screws and nuts of each part are loose. If so, it should be tightened in time. If there is a lack of nails less cap phenomenon, to inform the repair personnel to deal with in time.
2. Check whether there is abnormal blockage of the feeding screw part (whether there is debris). If there is debris to be removed from the blockage, the dust or clean water in the derailment should be blown with compressed air.
3. check the cutting tool group, if not sharp, please replace in time. At the same time, it is necessary to add oil to the transmission part of the cutter by dipping it in. Dip the oil with a small stick and slowly drop it on it. It can not be poured into the sending belt rail, otherwise the packing belt will slip.
4. If abnormal phenomena are found in the boot process. Such as: loud sound, vibration, smell, etc., if they can not find, should stop the notice to repair personnel to deal with, so as not to cause damage to parts.
5. After a long time of use, our operators should lubricate each part of the packaging machine to ensure that each part can work normally.
6. The workshop staff in the maintenance of the automatic packaging machine, every time to record the fault of the machine, in order to facilitate the inquiry in the future.
With the acceleration of packaging machine manufacturing industry and the continuous upgrading of intelligent transformation, more and more highly automated packaging machines have entered the door of food enterprises.
Packaging machine for packing can be used for a variety of work, such as the four broad categories of professional granule, powder, paste, liquid, etc., we need packaging products, only need to undertake choosing according to the product of blanking method or model machine, and then for packaging can, packaging capacity can be adjusted according to the customer's demand.
At the same time, the use of packaging machine benefits are also very much, not only save the cost of production, but also improve the efficiency of production is a good choice for production.
