The overall level of micro-nano powder packaging machine improves the development of multi-functional high efficiency and low consumption.

The vacuum packaging machine should be used in an environment where the temperature is -10℃ -50 ℃, the relative humidity is not more than 85%, and there is no corrosive gas, no dust and no explosive danger in the surrounding air. Like the baler and shrink machine, the vacuum packing machine is a three-phase 380V power supply. To ensure that the vacuum pump is working properly for the vacuum packaging machine, the vacuum pump motor is not allowed to reverse. Should often check the oil tea 3D transparent film packaging machine position, the normal oil level is 1/2-3/4 of the oil window (can not exceed), when there is water in the vacuum pump or the oil color turns black, at this time should be replaced with new oil (generally work for one or two months to replace once, with 1# vacuum gasoline or 30# gasoline, oil can also). The impurity filter should be cleaned frequently (generally 1-2 months cleaning once, such as packaging debris should shorten the cleaning time). After 2-3 months of continuous work, the back cover should be opened 30 pairs of sliding parts and switch block with lubricating oil, and the connected activities on the heating rod should be lubricated according to the use condition. The pressure reduction, filter, oil mist triplet 24 should be checked frequently to ensure that there is oil in the oil mist and oil cup (sewing machine oil), and there is no water in the filter cup. The heating strip and silicone strip should be kept clean, and no foreign matter should be stuck to avoid affecting the sealing quality. The two layers of paste on the heating rod and under the heating sheet play an insulating role, and should be replaced in time when there is damage to avoid short circuit. The user provides its own working air source and inflated air source. The working pressure of the vacuum packaging machine has been set at 0.3MPa, which is more suitable. Do not adjust too much without special circumstances. The vacuum packaging machine is not allowed to tilt and impact during the handling process, and can not be put down for handling. The vacuum packing machine must have a reliable grounding device during installation. Do not put your hand under the heating rod to prevent injury. Cut off the power immediately in case of emergency. When working, first ventilate and then power on. When stopping, first power off and then gas off. In order to create the greatest benefits for yourself within the specified time, it is necessary to ensure that your food packaging production line is running well, and there will be no errors in the production process, so as to avoid the impact of errors and failures as far as possible, it will be the greatest benefits for the enterprise. The level of automation in the manufacturing industry is constantly increasing, and the scope of application is expanding. Automation in the packaging machinery industry is changing the way the packaging process acts and the processing methods of packaging containers and materials.