According to the raw materials, the valve pocket can be divided into: PP valve pocket, PE valve pocket, paper and plastic compound valve pocket, kraft paper valve pocket and multi-layer kraft paper valve pocket.
PP valve pocket is made of polypropylene woven cloth upper valve port or lower valve port, than the general PP woven bag can improve the packaging power;
PE valve pocket is made of polyethylene woven cloth valve port;
Paper-plastic compound valve pocket is a plastic woven bag (cloth) as the base material, the flow method is made of composite (cloth/film composite for two in one, cloth/film/paper composite for three in one);
The raw material of kraft paper valve pocket is mainly kraft paper, which is divided into imported kraft paper and domestic kraft paper.
According to the opening, the valve pocket can be divided into: the upper opening valve pocket, the lower opening valve pocket, the upper and lower opening valve pocket.
The use of valve pocket valve pocket is mainly used for packaging food powder, chemical powder, fertilizer, synthetic materials, explosives, food, salt, minerals and other powder or granular solid materials and flexible items.
Especially suitable for export enterprises to use, can improve the packaging grade of products.
With the rapid development of China's economy, the purchasing power level of domestic residents will gradually increase their willingness to slow consumption, and the consumption concept will tend to further improve the quality of life.
The market demand for liquid food such as beverage, wine, edible oil and condiments will also grow steadily with the development of economy and the improvement of people's living standards.
Ultrafine powder valve port packing machine


Packing speed and bag-making length can be adjusted stepless in additional range without replacement of parts.
The bag-making length is set digitally by the controller of the packaging machine, and the bag-making length is adjusted easily and conveniently by the stepping motor to drive the bag-making. The bag-making length is accurate and the work is stable and reliable.
The heat seal body adopts four heating control channels, the heat seal temperature can be set in advance, the active temperature control, to ensure a good heat balance, suitable for a variety of packaging materials, to ensure that the bag mouth sealing is tight, smooth and beautiful.
Selects the high quality photoelectric switch (electric eye) to carry on the detection and the positioning control to the color mark printed on the package data, causes the package product to obtain the intact trademark picture.
(Intelligent photoelectric color calibration and position control system can actively eliminate the influence of disturbing signals caused by abnormal color standard pictures and poorly printed packaging data, and the work is stable and reliable.)
Proactively print the batch number or production date of the packaged product.
In each bag of packaged products cut easy to tear, easy for consumers to use.
When changing the width of the bag for packaging products, the shaper used to make the bag needs to be replaced.
All the parts touching the packaging materials are made of stainless steel or non-toxic materials, in line with the hygiene standards of the food industry and the pharmaceutical industry.
When the powder material packaging is pressed, the operation can be completed actively, with fast working speed and fast power.





