Powder bag shaping machine Air mill and cyclone separator, dust collector, induced draft fan to form a complete set of crushing system. After the compressed air is filtered and dried, it is sprayed into the grinding chamber at a high speed through the Laval nozzle. The materials are crushed by repeated collision, friction and shear at the intersection of multiple high-pressure air streams. The crushed materials move to the classification area with the updraft under the action of the fan, and the coarse and fine materials are separated under the strong centrifugal force generated by the high-speed rotating classification turbine. The fine particles that meet the particle size requirements enter the cyclone separator and dust collector through the grading wheel, and the coarse particles fall to the grinding zone and continue to be crushed.
After the material enters the grinding chamber through the screw feeder, the material is crushed by the collision and friction caused by the rapid expansion of the gas stream into the fluidized bed suspended boiling caused by several nozzles set relative to each other. The coarse and fine mixed powder is driven by the negative pressure air flow through the turbine classifier set at the top, and the fine powder is forced through the classifier and collected by the cyclone collector and the bag dust collector. The coarse powder is thrown to the four walls by gravity and the centrifugal force generated by the high-speed rotating classifier, and then it settles back to the grinding chamber for further grinding.
The high pressure air flow, as the crushing kinetic energy, enters the stabilized gas reservoir at the periphery of the crushing chamber as the gas distribution station. The air flow is accelerated into the supersonic air flow through the Laval nozzle and enters the grinding chamber. At the same time, the material is accelerated into the grinding chamber through the Churi nozzle for synchronous crushing. Because the Laval nozzle and the crushing chamber are installed at an acute Angle, the high-speed jet drives the material to do circulation movement in the crushing chamber, and the particles and the particles and the fixed target wall surface have mutual impact, collision and friction to crush. Driven by centripetal air flow, the fine particles are introduced into the central outlet pipe of the crusher into the cyclone separator for collection, and the coarse powder is thrown to the wall of the grinding chamber for circulation movement under the action of centrifugal force and continues to crush.





