Particle packing machine is a kind of unpacked products or small packaging products semi-automatic or automatic into the transport packaging of a class of machinery and equipment, its basic principle is to arrange the products in a certain way and quantitative into the box (carton, plastic box, tray), and the opening part of the box closed or sealed.
According to the requirements of the automatic particle packing machine, it should have the basic functions of carton forming (or opening carton), measuring, packing, and some are also equipped with the basic functions of sealing or bundling.
The operation process of pellet packing machine
1. Before production and processing, prepare to check whether all the parts in the main machine body of the equipment are normal, whether the cylinder fixing screws are tightened, whether there are impurities on the belt conveyor belt, and carry out certain oil lubrication treatment on the necessary part.
2. Open the main switch of the air valve, and ensure that the air pressure is within the range of 0.6 ~ 0.8Mpa, and the air pressure of the grasped bottle head is about 0.2Mpa.
Turn on the power of the control cabinet.
Gently press the "power supply" button on the control cabinet, and the internal power equipment will be energized.
3. After gently pressing the "power supply" button, the transmission lines of empty boxes and full boxes will be operated.
Place empty boxes on the empty line below the main engine and ensure that there are at least two empty boxes above the empty line at all times during the production line operation.
According to the product specifications of the touch screen display control, other operations can be carried out only after the control is completed.
4. Start the simulation trial operation (in the case of no bottle), enter the manual interface, gently press the bottle three inspection boxes to open and cover the goods to ensure that the indicator lights are on, enter the automatic interface, switch to the automatic mode, gently press the operation of the operation panel, the machine and equipment start to execute the simulation operation.
5. During normal operation.
Enter the manual interface, press the bottle at the high and low position, unpack the bottle at the forbidden position, press the point to enter the bottle gradually and gradually, until the bottle is full (if there is a bottle to help up in time).
Press on the bottle of high and low level in the low post, light normally switch to unscramble bottle bottle allows, light switch manual type interface according to the full, according to the point move unscramble bottle, unscramble bottle after check the technical parameters of the number of the interface between one and five bottles of preset and actual values is consistent, the actual value must be greater than or equal to the preset value) if the actual value is lower than the preset value please change small default value, but all the default values for 11 normal circumstances.
Gently press the grasping head to close to check whether the grasping head is closed (must be closed), click, the host descending to observe whether the grasping head is aligned with the bottle, after alignment switch to automatic interface, click manual mode to switch to automatic mode, gently press the operation of the operation panel granular packaging machine into the automatic work.
6. Downtime.
When the bottle behind can not keep up when the need to stop or to stop, after the bottle grasp head put the bottle, the bottle grasp head rise to the position, when the rocker arm moves back, immediately press the stop button on the operation panel, the particle packaging machine will stop or stop.
The reset state of each station, turn off the main valve, and then turn off the power supply main switch.
Note: Electrical control cabinet, control knob, keyboard technical parameters and other system configurations have been configured according to the requirements of the production line. Non-equipment maintenance personnel are forbidden to re-control the system configurations.
During the operation of the machine and equipment, it is forbidden to put the body into the machine and equipment and under the belt conveyor. If it is necessary to control or troubleshoot, it should be operated after the operation of the machine and equipment is terminated.
