The quality of automatic vacuum packaging machine determines the service life, work efficiency and even affect the packaging speed.
Therefore, the quality of the automatic vacuum packing machine is very important. Here is a simple analysis:
1, the selection of material, at present, most automatic vacuum packaging machine is more inclined to 304 stainless steel production, not only not easy to rust, and easy to clean, especially suitable for food automatic vacuum packaging machine.
2. The vacuum pump is equivalent to the CPU, which can also be said to be the brain of the vacuum machine. It plays a decisive role in the vacuum packaging
3. Check whether the function of automatic vacuum packing machine is more convenient. It has many functions and is relatively simple to operate, which is not only easy to use but also convenient to maintain.
4. Configuration is the link for the normal use of the vacuum machine. Executive configuration can not only improve the overall performance of the vacuum machine, but also have a long service time.
What factors affect the quality of the automatic vacuum packing machine
If the above four requirements are met, please check to see if the other conditions are also met.
(1) The vacuum pumping caused by the reverse rotation of the vacuum pump is not good, so the rotation direction of the vacuum pump should be adjusted to correspond with the motor arrow of the pump.
(2) The sealing ring of the upper cover is not consistent with the plane of the lower chamber. Pressure should be applied on the cover properly to seal the cover and the lower chamber.
(3) The automatic vacuum packing machine is not vacuum well caused by the improper travel switch, and the position of the travel switch limit piece can be adjusted appropriately.
(4) If the vacuum is not good due to the time relay out of control, a new time relay should be replaced.
(5) air leakage of the vent valve leads to bad vacuum pumping of the automatic vacuum packing machine.
Check the exhaust valve for wear, pollution, etc., to ensure that air leakage does not occur.
(6) Check whether each pipeline leaks and loosens.
