Dry Motar Filling Packaging Machine

DCS-FCQ Series: Air Forced Packer for Valve Bag--Dry Motar Filling Packaging Machine

1. Product Description of Dry Motar Filling Packaging Machine

This series of machines are designed for Packing Mixture with Powders and Granules, Granular Materials into Valve Bags, the Advantage is Fast Packing Speed and High Accuracy. Representative Materials are Barite, Silicon Sand, Calcined Flint Clay, Active Carbon, Refractory Materials, and Dry Mortar etc.

2. Technical Parameters of Dry Motar Filling Packaging Machine

● Weighing Range: 10-50 kg

● Packing Rate: 3-8 bags/minute (packing speed depends on the material features and packing bags)

● Weighing Accuracy: ± 0.2-0.6％

● Applicable Voltage: AC22OV-440V 50/60HZ Three Phases and Four Lines (Clients should supply the voltage class and frequency at their local place)

● Air Source Requirement: 0.4-0.8MPa Dry Compressed Air、Total Air Consumption: 0.4m³/min

● Applicable Environment: Altitude≤2000meters, Humidity≤95% RH Non-congealable Dew, Operating Temperature:0℃～50℃, Storage Temperature : -20℃～70℃

3．Working Principle of Dry Motar Filling Packaging Machine

DCS-FCQ series packing machine using forced air to sweep materials. When the materials in boiling hopper reaches high level, valve on the top of hopper closes. Under the enclosed circumstance, materials are swept into packing bag by the strong wind with low pressure from outside the hopper. Meantime mechanical and electronic parts cooperate together to control the materials within the target range, finishing the packing and metering.

Quantitative packaging machine weighing hopper gravity quantitative packaging automatic weighing instrument as a control, the single scale can hold 280-300 bags of yellow sand per hour, and the double scale can hold 600 bags of yellow sand per hour. One bag of 100 catties, of course, the number of catties can be adjusted, the sewing machine automatically seals the bag with yellow sand, coal weighing, bagging and sealing as one machine. Function: filling, metering, packing, filling, and sealing. The machine uses a large-capacity hopper that can hold about two cubic meters of sand at a time; the hopper is three-sided and high, and the other side is convenient for forklifts to use; the sand bagging machine is to avoid sand It is hollow without feeding, and a silo wall rapper is installed on the silo wall to assist sand discharge, which is efficient and saves manpower.

For the sand packing machine, we will make the material opening for you according to the size of your bag. Of course, you can also select the bag according to our conventional discharge opening. The discharge opening of our batch is 273mm in diameter, and the bag is 50 cm in diameter. 80 cm wide and long is suitable, of course, it will be set according to the number of catties per bag.

 4.FAQ:

6. Knowledge on dry motar :

Definition:

Dry powder mortar refers to a granular or powdered aggregate (such as quartz sand), inorganic cementing material (such as cement) and additives (such as polymer) that have been dried and sieved and are physically mixed in a certain proportion. It is a material that can be used directly after being transported to the construction site in bag or bulk form and mixed with water. It is also called dry mortar powder, dry-mix mortar, and dry-mix powder. Some construction adhesives also belong to this category. Dry mortar is used as a thin layer to play the role of bonding, liner, protection and decoration in the construction industry, and it is widely used in construction and decoration projects.

Performance characteristics:

The first is high product quality. Dry powder mortar solves the problem that the traditional process is difficult to grasp the mortar ratio and the quality is affected. The measurement is very accurate and the quality is reliable. Because mortars for different purposes have different requirements for the characteristics of materials such as shrinkage resistance, crack resistance, heat preservation, and moisture resistance, and the workability, water retention, and setting time of the construction requirements are also different. These characteristics can only be achieved by strictly formulating scientific formulas. Only the production process of dry mortar can meet this requirement. Because of the accurate measurement and quality assurance, the quality of the project after the use of dry mortar is significantly improved, the construction period is significantly shortened, and the amount of labor used is reduced.

Next is the full variety. According to the different requirements of building construction, many products and specifications have been developed. In terms of products alone, there are masonry mortar, plastering mortar, and floor mortar that meet the needs of various constructions; according to the different requirements of building quality, the specifications can be divided into M2.5, M5, M10, M15, M20, Various specifications of M25 and M30: There are different requirements for consistency, layering, density and strength in terms of quality. According to the needs of different users, the packaging can also be divided into 5kg, 20kg, 25kg, 50kg, and several kinds, and also available in bulk The car is sealed for transportation.

Then there is ease of use. Just like instant noodles, take it and use it at any time, add about 15% water, stir for 5-6 minutes and serve. The remaining dry powder is used as a spare. It has a shelf life of 3 months, but it has been left for 6 months in the test and it has no strength. obvious change. The current market price is around 250 yuan/ton.

Hot Tags: dry motar filling packaging machine, China, manufacturers, suppliers, factory, customized, buy, price, quotation, for sale, made in China, nanometer sized powder machine, Valve Bag Vacuuming Bagging Machine, Cocoa Powder Valve Bag Packing Machine, automatic bagging machine, Dry Motar Filling Packaging Machine, 10kg 20kg Rice Wheat Packing Machine