Since the appearance of ton bag packing machine, it has obviously reduced a lot of manpower and material resources.
That is to say, ton bag packing machine can reduce the workload of packaging, but also improve the work efficiency.
However, if used for a period of time, it may cause some glitches.
Different faults are caused by different reasons, so we need to make a specific analysis of the situation.
Then, we can take targeted measures according to the specific reasons.
As we all know, only by doing the right medicine, can it be restored to normal as soon as possible.
For example, if it is found that the PLC of the ton bag packing machine has no input, then the main reasons include: 1. The output data line of the controller is not inserted well;
2, the controller has no output;
3. Data line is damaged.
For the reasons described above, the corresponding measures we should take are: 1. Reinsert the data line of the ton bag packing machine; 2.
2. Check and replace the controller;
3. Change the data line in time.
At the time of work, sometimes also found that the solenoid valve does not signal such a problem.
The main reasons include: PLC no output, PLC output system damage, PLC in the programming position, solenoid valve signal line damage.
For the reasons listed above, then we should take the corresponding measures as follows: 1. Replace the PLC of the ton bag packing machine in time;
2. Adjust PLC to suitable operating position;
3. Replace the signal line in time.
A common problem is that during the operation of the ton bag packing machine, the cylinder suddenly fails to move.
The reason for such a problem, the main reasons are: PLC no output, solenoid valve damage, cylinder or pipe damage, line fault, etc.
Then we should replace and repair in time.
