Ton bag packing machine is a large-scale weighing packing equipment for ton bag packing materials. It is a multi-purpose packing machine integrating electronic weighing, automatic bag removal and dust removal.
The following Xiaobian to explain the working principle of ton bag packaging machine.
When the quantitative packing scale enters the automatic operation state, the weighing control system opens the feeding door and starts feeding.
Bags set on feeding mouth, then hang bags corners on the cylinder, press "done" button, the cylinder pressure bag then began to work and pressure mouth, cylinder will open the four corners of packet, the controller will automatically remove packing weight, the screw rotation rapid material into bags, vibration table vibration will material compaction, and overflow with air bag dust by vacuum cleaner dust collector to absorb, to feed fast to set value, the screw rotation speed slow slow, vibration to stop, to the set value, stop feeding.
The feeding device is a fast and slow two-stage feeding mode, which is composed of adjustable speed motor, belt drive, screw shaft and feeding mouth. The feeding mouth has a dust suction mouth. The variable speed motor is controlled by an electrical box, and the material is added to the packing bag through the screw from the silo.
When the weight of the material reaches the set value of fast feeding, stop fast feeding and keep slow feeding;
When the weight of the material reaches the set value, close the feeding door and complete the dynamic weighing process;
At this time, the system detects whether the bag clamping device is in a predetermined state. When the bag is clamped tightly, the system sends a control signal to open the unloading door of the weighing hopper, and the material enters the packing bag. After the material is put, the unloading door of the weighing hopper will be automatically closed.
Loose the bag clamping device after unloading the empty material, and the bag will fall automatically.
Sew the bag after it falls and transfer it to the next station.
This cycle is repeated automatically.
