Chapter 1 General Provisions
The first article is to fully mobilize the enthusiasm of all departments (units) and all employees, enhance employees’ sense of responsibility, establish an effective incentive and restraint mechanism, improve the company’s operating efficiency, management level and economic benefits, and promote the company’s annual comprehensive budget goal to exceed the completion , This method is specially formulated.
Article 2 The company’s performance appraisal is guided by the scientific outlook on development, unconventional thinking, and leap-forward development, centered on reaching production standards, optimizing indicators, and consolidating and improving, with the goal of maximizing the company’s profits, increasing output and strengthening costs , Cost control is the main line, adhere to the distribution principle of more work, more rewards, implement fair, just and scientific assessment, promote various management to a higher level, and ensure the realization of the company's annual production and operation goals.
Article 3 The company performance appraisal adheres to the following principles:
(1) Principles of strictness, fairness, justice and openness
(2) The principle of combining quantitative assessment with qualitative assessment
(3) Reflect the principle of consistent responsibility, right
(4) Reflect the principle of difference
(5) Principles of institutionalization of key work assessment
(6) Principles of rigid assessment
Article 4 Assessment cycle:
The performance appraisal is divided into monthly appraisal, quarterly appraisal and annual appraisal.
(1) Monthly assessment date: According to the actual settlement date of the company's production, the monthly assessment date is from the 21st of the previous month to the 20th of this month, and so on;
(2) Quarterly assessment date: the same as the monthly assessment date at the end of the quarter, and the monthly assessment and quarterly assessment at the end of the quarter will be combined;
(3) Annual assessment date: The monthly assessment date in December is the annual assessment date, and December is combined with the annual assessment.
Chapter II Organizational Leadership
Article 5 In order to do a good job in performance appraisal, the company has established a performance appraisal committee. The composition and responsibilities of the staff are as follows:
(1) Performance Appraisal Committee
Director: xxx
Deputy Director: xxx, xxx
Members: xx, xxx, xxx,
Responsibilities: Responsible for leadership performance appraisal
1. Approve the annual performance appraisal method;
2. Responsible for reviewing the assessment results;
3. Supervise and inspect the implementation of performance appraisal work;
4. Responsible for dealing with major issues arising during the assessment and implementation process.
(2) An office under the Performance Appraisal Committee
Director: mine manager or deputy mine manager (concurrently)
Deputy Director: Director of Comprehensive Office, Human Resources Department
Member units: Vice President, Mine Director, Safety and Environment Department, Concentrator, Production Department, Engineering Department.
Responsibilities: The Appraisal Office is the executive body of performance appraisal work, which works under the leadership and guidance of the Appraisal Committee.
1. Organize relevant departments to formulate performance appraisal index system;
2. Responsible for formulating and revising performance appraisal methods;
3. Responsible for compiling the performance target responsibility letter of each unit;
4. Responsible for the daily work in the assessment process, verify and summarize the assessment results, and submit them to the assessment committee for approval;
5. Responsible for putting forward suggestions for handling problems arising in the assessment process;
6. Responsible for supervising, inspecting and guiding the performance appraisal work of various departments (units).
Article 6 Each department (unit) must form a performance appraisal team with the person in charge of the department (unit) as the team (group) leader, and under the leadership and guidance of the leader in charge and the performance appraisal office, formulate the department (unit) ) Performance appraisal implementation methods, and earnestly do a good job in the performance appraisal of employees.
Chapter III Evaluation Index Setting
Article 7 The composition of the assessment index system
(1) The evaluation index system of the production unit: output index, quality index, technical and economic index, financial index, functional management, special management (production management, safety management, equipment management, production technology management, basic management).
(2) The indicator system of functional departments: linked indicators, financial indicators, functional indicators, etc.
(3) The quantifiable indicators such as output, cost, technical and economic indicators are divided into three levels to set targets. The second level target is the monthly plan index set based on the company's annual production and operation overall objectives. The first level target and the third level target are in the second level. Based on the file target, it is determined by floating up and down according to a certain proportion.
Absolute penalties are imposed on veto indicators, personal behavior, and work error assessments, without weight distribution.
Article 8 Various types of assessment index settings and assessment methods
For the assessment of quantitative indicators, the score is calculated according to the completion of the indicator, and then the reward and penalty amount is calculated. For the assessment of qualitative indicators, it is impossible to directly calculate the score. According to the actual completion of the work, determine the four levels of "unfinished, generally completed, well completed, and very well completed", and then refer to N%, N according to the category. %, N%, N% four points range to calculate the score.
(1) Production indicators
1. Stripping assessment
According to the annual divestiture plan, it is broken down to each month, and the first, second, and third goals are set, and the production technology department (mining plant) is mainly assessed.
2. Assessment of supply of ore
The monthly planned value determined by the mineral processing volume is the second-level target; the first-level and third-level targets are set on the basis of the planned value, and the production technology department (mining plant) is mainly assessed.
3. Handling ore volume assessment
According to the annual mineral processing plan, it is broken down to each month, and the first, second, and third targets are set, mainly for the assessment of the concentrator, linked to the assessment of the company's electromechanical maintenance center, laboratory center, storage auxiliary center and various departments of the agency.
(2) Quality indicators
Assessment indicators: raw ore grade, loss rate, dilution rate, concentrate grade, recovery rate, concentrate moisture, tailings conveying concentration. The production technology department (mining plant) and the concentrator are assessed respectively.
(3) Financial indicators
1. Cost index
(1) Assessment content
For the cost of concentrate manufacturing, the monthly plan value is the second-tier target, and the first and third-tier targets are set according to the plan value. Link to the assessment of production technology department (mining plant), power plant, quality inspection center, automatic control information center and various departments of the agency.
The manufacturing cost of concentrate of the concentrator is based on the monthly plan value as the second-level target, and the first and third-level targets are set according to the planned value.
The mining cost of the Production Technology Department (mining plant) takes the monthly plan value as the second-tier target, and sets the first and third-tier targets according to the planned value.
(2) Assessment method
If you do not reach the first level of the target in the current month, you will not be scored; if you reach the first level or more than the second level in the current month, you will get the first level; if you complete the second level or more, the score is calculated according to the insertion method; each quarter is evaluated based on the cumulative completion status.
2. Inventory occupation
Assessment objects: Production Technology Department (Mining Plant), Concentrator, Equipment Management Department, Supply Sales Department, Asset Finance Department.
Evaluation method: monthly deduction at 0.05% of the over-budget amount; for the linked unit, 0.03% of the over-budget amount is deducted, and a deduction ceiling is set. Calculated according to the budget price during assessment.
3. cost
Controllable expenses: The assessment objects are the production technology department (mining plant), mineral processing plant, power plant, quality inspection center, automatic control information center, etc. The assessment method shall be implemented in accordance with the performance target responsibility statement.
Management expenses: divided into internal control expenses and control expenses. Internal control expenses refer to the expenses incurred in the business of this department, including entertainment expenses, travel expenses, office expenses, etc. Control expenses refer to expenses at the disposal of the company on behalf of the company, subject to the company's budget. The assessment method shall be implemented in accordance with the performance target responsibility letter.
(4) Technical and economic indicators
Main assessment indicators: unit consumption of electricity for beneficiation, unit consumption of lime, unit consumption of steel balls, unit consumption of liner, utilization rate of backwater, etc.
Assessment object: mineral processing plant. Link to the assessment equipment management department, supply and sales department and power plant.
(5) Functional indicators
Set corresponding assessment indicators according to the functional scope and work content of each department (unit). The evaluation indicators are implemented in accordance with the "Performance Target Responsibility Letter" of each department (unit).
(6) Special management
The specific management assessment rules are the responsibility of the following departments, which will be separately formulated in accordance with these measures, and will be included in the assessment after discussion and approval by the chairman (general manager) at the office meeting.
1. Safety and environmental management
The Ministry of Safety and Environmental Protection is responsible for the management of on-site safe and civilized production, safety education and training, transportation, fire protection, safety emergency rescue, hidden danger investigation, accidents, greening and environmental protection.
For extremely large (personal, equipment, production, fire, environmental pollution) accidents, major (personal, equipment, production, fire, environmental pollution) accidents, and general (personal, equipment, production, fire, environmental pollution) accidents, veto assessment will be implemented. Specific implementation is based on "(7) Assessment of Security Veto Indicators" in this chapter.
2. Equipment management
The equipment management department is responsible for formulating corresponding assessment content and methods for different units, mainly including equipment maintenance and regular inspection, fixed asset management, equipment accidents, spare parts, energy management, etc.
3. Production technology management
The production technology department (mining plant) is responsible, and works with the general dispatching office and the quality inspection center to formulate corresponding assessment content and methods for different units. It mainly includes technical indicators, process indicators, quality management, production planning, production scheduling and other management aspects.
4. Basic management
Responsible by the General Department. The assessment objects are the three factories and two centers, and the relevant departments (units) are conducted separately. Assessment content: team building, establishment of rules and regulations, fixed staff management, measurement ledger information management, standardization management, fixed setting management, three major regulations, incentive mechanism and training. For functional departments, the main assessment is grassroots services, and the General Department organizes secondary units to evaluate the work efficiency and service quality of the functional departments.
5. Key work
In order to ensure that the company's production, operation, and management arrangements are in place, the company will issue monthly key work plans for the month, and evaluate its completion monthly.
When the vice president and mine chief’s office proposes new performance appraisal items during the year, the relevant departments shall propose corresponding appraisal rules and submit them to the performance appraisal office to incorporate the performance appraisal.
(7) Assessment of safety veto indicators
Work deaths, fires, and environmental pollution accidents are linked to the Ministry of Safety and Environmental Protection, equipment accidents are linked to the Equipment Management Department, and production operation accidents are linked to the general dispatching office.
1. In case of work deaths or major accidents (equipment accidents, production accidents, fires, environmental pollution) in the month, the company-wide performance salary for the month is rejected.
2. Assessment of serious injuries or major accidents (equipment accidents, production accidents, fires, environmental pollution).
(1) If one person is seriously injured a month or a major accident (equipment accident, production accident, fire, environmental pollution) occurs, veto 20% of the monthly performance salary of the responsible unit (department), veto 10% of the monthly performance salary of the linked unit, and veto others 5% of the unit.
(2) For two serious injuries per month or two major accidents (equipment accidents, production accidents, fires, environmental pollution), veto 40% of the monthly performance salary of the responsible unit (department), and veto 20% of the monthly performance salary of the linked unit. 10% of other units.
(3) For three severe injuries or three major accidents (equipment accidents, production accidents, fires, and environmental pollution) a month, the company-wide performance salary for the month was rejected.
3. Assessment of minor injuries or general accidents (equipment accidents, production accidents, fires, environmental pollution).
(1) For one person per month with minor injuries or a general accident (equipment accident, production accident, fire, environmental pollution), veto 5% of the monthly performance salary of the responsible unit and 3% of the monthly performance salary of the linked unit.
(2) Two monthly minor injuries or two general accidents (equipment accidents, production accidents, fires, environmental pollution) occur, veto 10% of the monthly performance salary of the responsible unit and 5% of the monthly performance salary of the linked unit.
(3) For three minor injuries or three general accidents (equipment accidents, production accidents, fires, environmental pollution) a month, 15% of the monthly performance salary of the responsible unit is rejected, and 8% of the monthly performance salary of the linked unit is rejected.
(4) Four monthly minor injuries or four general accidents (equipment accidents, production accidents, fires, environmental pollution) occurred, veto 20% of the monthly performance salary of the responsible unit, veto 10% of the monthly performance salary of the linked unit, and veto other units 5%.
Article 9 Basis for Assessment
(1) Each department (unit) performance target responsibility letter;
(2) Annual, quarterly, and monthly production and operation plans and actual completion status issued by the company;
(3) The completion of important work arranged by the company's meeting;
(4) The company's relevant management measures and rules and regulations;
(5) The completion of other work arranged by the company;
(6) Daily, weekly, and monthly reports of relevant departments.
Chapter IV Assessment, Rewards and Punishments
Article 10 Procedures for determining the assessment indicators for monthly key tasks
(1) Before the 20th of each month, the department (unit) shall fill in the "Department (Unit) Performance Appraisal Form" according to the work plan for the next month, and report the monthly key work assessment indicators to the Planning Enterprise Management Department after being reviewed by the responsible leader.
(2) The Planning Enterprise Management Department and the departments (units) confirm the assessment indicators for key tasks this month.
(3) The key tasks decided at company meetings or under special circumstances are directly incorporated into the implementation.
Article 11 The subject of performance appraisal
(1) The performance appraisal of the department (unit) and the principal's principal position is the responsibility of the performance appraisal office, and is jointly assessed and confirmed by the deputy general manager, the mine manager, the direct superior of the appraised object and the performance appraisal office.
(2) The performance appraisal of the deputy head of the department (unit) is the responsibility of the head of the department (unit), and the performance appraisal of other employees is carried out by the department (unit). The specific appraisal principles will be formulated separately.
Article 12 Monthly, quarterly and annual assessment
(1) Monthly assessment: Pass monthly assessment to realize the mid-month plan part of the company's annual plan, and use the month to ensure the completion of the quarterly and annual overall production tasks.
(2) Quarterly assessment: The content of the assessment is the same as that of the monthly assessment, and each quarter will be comprehensively assessed with reference to the actual completion of the monthly assessment to achieve the quarterly production targets as planned, while ensuring the smooth completion of the annual plan ;
(3) Annual appraisal: the appraisal index is the same as the monthly appraisal index. By the end of the year (the fourth quarter, that is, combined in December), the comprehensive appraisal unit will determine the various production and management index tasks at the beginning of the year.
Article 13 Provision of Assessment Data
The functional departments responsible for the assessment shall report the relevant monthly assessment data to the Planning and Enterprise Management Department before the 27th of this month after being reviewed and approved by the leader in accordance with their respective functional scope.
(1) Data related to investment control, contract management, and basic management are provided by the Planning Enterprise Management Department;
(2) Data on the progress, quality, number of people, management and resource guarantee departments of construction and supervision units are provided by the Engineering Department;
(3) Data on indicators such as safety and environment are provided by the Ministry of Safety and Environmental Protection;
(4) Data on wages and labor discipline are provided by the Human Resources Department;
(5) The relevant profit, cost (expense) and other data are provided by the Asset Finance Department;
(6) The relevant equipment, energy and other data are provided by the equipment management department and the power plant;
(7) The relevant material procurement and other data are provided by the supply and sales department;
(8) Data related to production technology and other indicators are provided by the production technology department (mining plant);
(9) The data about the automatic control information center is provided by the concentrator;
(10) Data related to production management shall be provided by the general dispatching office;
(11) The relevant administrative office data shall be provided by the office.
Article 14 Rewards and Penalties
(1) Implement the method of evaluating the previous month in the following month, pre-cashing on a monthly basis, accumulative quarterly evaluation, and annual accounting.
(2) Adopt the "thousand points system + cash rewards and punishments" method to implement the assessment. The assessment indicators and scores are detailed in the "Performance Target Responsibility Letter" of each department (unit). The second grade target in the "Performance Target Responsibility Letter" is N Points, the proportion of points is determined according to their importance.
(3) The evaluation coefficient calculation method is determined according to the department (unit) score and the corresponding coefficient in the "Department (Unit) Evaluation Coefficient Table" (see Annex 1). When the department (unit) score is less than N points, the reward coefficient is the score rate, and the minimum is not less than N.





