Automatic 25kg Powder Packing Machine With Touch Screen

Automatic 25kg Powder Packing Machine with Touch Screen With best quality

General introduction of Automatic 25kg Powder Packing Machine with Touch Screen:

Aiming at the problem of poor fluidity of special dry powder and small particle size materials, our company independently developed air-blown valve port packaging machine with compressed air as power source. The new packing machine through the action of compressed air to transport the material into the airflow state, so as to achieve the effect of pneumatic conveying material. The new packaging machine adopts imported pneumatic rubber valve to realize gas flow control, in order to achieve the control of the feeding amount of packaging materials, to achieve efficient and stable packaging precision and speed.

Technical data of Automatic 25kg Powder Packing Machine with Touch Screen:
Weighing feedback automatic tracking, high precision, good stability. Packaging range can be timely adjusted by microcomputer watch head, stable and reliable.
Industrial parameters can be freely adjusted and stored, easy to operate; Fast packaging speed, stable precision;
Less wearing parts, small maintenance workload, greatly increased service life; The structure layout of the whole machine is reasonable, and the replacement of packaging varieties is very convenient;
Pneumatic blowing of materials can greatly reduce the damage rate in the process of packing materials.

How to maintain the powder packaging machine?

The advanced automation mode not only effectively improves the production efficiency of the enterprise, but also better guarantees the packaging quality of the product. Therefore, large vertical powder packaging machine, multi-row powder packaging machine, has also become one of the preferred packaging equipment for major enterprises, but there are often many enterprises do not understand the importance of machine maintenance and maintenance methods. Powder packaging machine must pay attention to daily maintenance and maintenance, because this can not only extend the service life of the equipment, but also the equipment itself will not fail and so on. So for the maintenance and maintenance of powder packaging machine, I will provide you with a few suggestions:

1. Fill oil lubrication: to regularly fill oil lubrication to its gear mesh, bearing oil holes and moving parts, once per shift, the reducer is strictly prohibited to run without oil. When filling lubricating oil, be careful not to place the oil tank on the rotating belt to prevent damage caused by skidding or premature aging of the belt.

Another point that must be noted is that the reducer must not run when there is no oil, and after the first operation of 300 hours, clean the inside and replace the new oil, and then change the oil every 2500 hours. When adding lubricating oil, do not drop oil on the transmission belt, because this will cause the powder packaging machine to slip or the belt premature aging damage.

2. Clean regularly: After the shutdown, it is necessary to clean the metering part in time, and often clean the heat sealer body, especially the packaged materials with high sugar content of some powder, it is best to clean the turntable and the feeding door, the heat sealer body is also the part that needs to be cleaned frequently to ensure that the sealing pattern of the packaging product is clear, and the scattered materials should be cleaned in time to facilitate the clean of the machine parts. So as to better extend its service life, but also often clean the dust in the electric control box, in order to prevent electrical faults such as short circuit or poor contact.

3 Maintenance of the machine: Maintenance of the powder packaging machine is one of the keys to prolong the life of the packaging machine, so it is necessary to regularly check the screws in each part of the powder packaging machine, there should be no loosening, otherwise, it will affect the normal far rotation of the whole machine, for the electrical part should pay attention to waterproof, moisture proof, anti-corrosion, anti-rat, to ensure that the electric control box and the terminal at the clean, in order to prevent electrical failure, after shutdown, The two heat sealer bodies should be kept in an open position to prevent burning the packaging material.

Hot Tags: automatic 25kg powder packing machine with touch screen, China, manufacturers, suppliers, factory, customized, buy, price, quotation, for sale, made in China, valve bagging equipment, Perlite Powder Valve Bag Packing Machine, carbon black packing machine, Valve Bag Vacuuming Bagging Machine, Cocoa Powder Valve Bag Packing Machine, Vacuuming Bag Packing Machine